100 Watt CFL Grow / Dinafem Critical+ And Our Own Hybrids!
(NOTE: This post is the beginning of a series following our 100 Watt CFL demonstration grow from start to finish – seed to harvest. Bookmark or subscribe, and check back for weekly updates. This post is stickied to the home page for the time being, and each update will appear right below this introduction. Thanks for joining us!)
It’s time to show you some step-by-step results from one of the techniques I recommend to home growers in our “How To Grow Cannabis At Home: A Guide To Indoor Medical Marijuana Growing” eBook – a 100 Watt grow using CFL bulbs on just two plants to keep the grow size manageable yet produce enough cannabis for personal use.
Growing with 100 Watts of CFL (Compact Florescent Lighting) may not provide you with heaps of buds at the end of the grow, but should be more than enough for your own use for quite some time. Beyond that, the light output per watt of power consumed is excellent for 25 Watt (or thereabout) CFL bulbs. This translates to more light output – and therefore more marijuana output – per watt of energy put in. An energy efficient grow is not only environmentally friendly, it also keeps both the power bill down. Should you be concerned about drawing too much electric and therefore unwelcome attention to your grow, then this is the method for you.
I’ll be posting pictures of the grow from seedlings to dried & cured buds, so stay tuned to this post.
Want to know what this grow will cost in electricity? With 100 watts of lighting on 18 hours/day for 30 days (vegetative phase), you have 30 days x 1.8kWH = 54kWH. Flowering is only 12 hours a day, so 1.2kWH x (let’s say) 50 days for flowering = 60kWH. Even rounding up for fans and ventilation, total power consumption for lighting is about 120kWH.
If you pay 25 cents per kilowatt hour, the electricity for this grow will cost you roughly $30 in electricity! That is not bad at all. The big question then becomes – How much dried and cured bud will I get out of a 100W grow? Follow this journal, and you’ll see first hand!
The first step:
Today is Friday, August 9th, 2013 and the picture above shows a Dinafem Critical+ seedling (about 5 days old) in the foreground and several freshly sprouted (48 hours old) hybrid seeds from our own plants. There are two different hybrid crosses; labelled “DG x RQS” and “DG x AK”. The pollen for the cross was taken from a particularly virile male Double Gum (hence “DG”), and crossed with a beautiful female Afghan Kush and a Royal Queen Seeds “Royal Automatic” plant that had an impressively fat main bud.In both cases the seeds matured perfectly, and have so far sprouted 100%.
I am a fan of Sensi’s “Double Gum”, and am excited to see how the traits of the different parent plants show up in the offspring. Other than the Critical+ from Dinafem (a free promo seed), these are not feminized seeds. This means thee will be some males, from which we may save pollen for further cross breeding.
Most of the plants will require a change of lighting to go into flowering (not “auto” varieties). It is possible that some of the RQS x DG plants will auto-flower. Of course, they may turn out to be male as well! This variety of plant types will be perfect for showcasing how a 100 Watt grow – easy for any grower to set up – can turn out. The plants range from “likely to finish quickly” (RQS Royal Automatic genetics) to average flowering time (Indica-heavy Double Gum x Afghan Kush) to the very Sativa “Critical+”, which will finish last. I gave the Critical+ a few days head start, since I will be topping it to keep it’s height under control.
Stay tuned to see how vegetative growth goes. I will be dedicating the blog to this series of posts for the next few months – from seed to flowering, harvest, and drying/curing. If veg growth goes as planned, I will switch to the flowering phase by the end of September. Harvest should be in late October (a couple weeks later for the Critical+ plant), provided that the hybrid varieties show more of their Indica genes rather than their Sativa heritage. If budding is still in full swing, we’ll let them fatten up, and see what kind of yield these provide under a very budget-minded 100 Watts of light!